New arrivals
- 1
- 2
-
Only 5 left in stock -
Package includes:
- KMG-10 Grinder with 10" contact wheel.
- Platen attachment.
- Work rest.
- 1.5/2 hp variable speed motor and VFD
- Pulley for motor.
- Pulley for grinder.
- Drive belt.
- Base plate.
- Mounting bracket for VFD and electrical hardware.
- Uses 2" X 72" belts.
*The 2 hp motor and VFD will run on standard 110 or 220VAC. A 2 hp motor is supplied, but when the VFD runs on a 110VAC, the max power output is 1.5hp. When the VFD runs on 220VAC it will produce a full 2hp. This extra value allows you to choose between using a 110V or a 220V power supply.
You will need a cord and plug appropriate to your setup choices (120V, 240V, plug or hardwired
-
Only 4 left in stock
Pack of 10 replacement pins for the blade holding racks
-
10" Magnums (1 in) Two wheels (1 each gritted and slotted)
1" Thick, 10" Diameter, 3/4" Arbor with 5/8" bushing
Deluxe Grit Pack, Instructions -
8" Kit
Two wheels (1 each gritted and slotted)
3/4" Thick, 8" Diameter, 5/8" Arbor with 1/2" bushing, Grit Pack, Instructions -
EvenHeat KH 120V 18" Heat Treat Kiln with Rampmaster III controller. This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.
May not be exactly as shown due to occasional product updates.
-
EvenHeat 220V 22.5" Heat Treat Kiln with TAP controller. The new TAP controler is revolutionary in so many ways that are not obvious. Yes, it's touch screen. Yes, it's WiFi enabled. Easy to enter your HT programs. Tracks power consumption and more.
This one comes with a solid state, quiet drive. The solid state relay is advertised as a "quiet drive". That means no click - clunk of a mechanical relay, but it also means increased reliabilty. If a mechanical relay fails "closed" the result is maximum temperature to the end of the cycle and a destroyed blade. THhs happens rarely with mechanical relays and never (to our knowledge) with solid state relays.
May not be exactly as shown due to occasional product updates.
This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.
-
MK Blade holding rack from EvenHeat - holds four blades and fits either KH, KO or KF kilns
-
MK 2 Blade holding rack from EvenHeat - holds six blades and fits KF & KO kilns
- 1
- 2