Coming soon

Items: 14 of 4, per page
  • The all-new KMG-TX – Tilting Extreme the Knife Making Grinder you’ve been dreaming of!  With the same robust construction of the original KMG, the completely re-engineered KMG-TX takes your grinding to the next level!  The 2×72 direct-drive grinder easily tilts from vertical position with a lever release and clicks securely into horizontal position and back again. The new KMG-TX features a ratcheting belt tension system, an all-new Axis Neutral Tracking system with a low wear steel tracking wheel, platen attachment wheels made of steel, smaller footprint. Works with ALL the classic KMG attachments including the Rotary Platen Attachment and Small Wheel Attachment. Runs on 110V or 220V AC — comes finished and pre-wired, nearly ready to plug in and GRIND! (you will need to connect the pre-wired motor cord to the VFD)

    We took everything we’ve learned from 20 years of making the industry-leading Knifemaker’s belt grinder, and put it into the KMG-TX Tilting Extreme! Everything you love about classic Beaumont Metalworks design with every feature you’ve been wanting in your knifemaking grinder!

    Including the Articulating Work Rest System for KMG-TX ! Eight components will allow you to create hundreds of combinations for every work support situation.

    • $4704.52
    • KMG-10 with 10" contact wheel.
    • Platen Attachment.
    • Work rest.
    • 1.5 hp motor
    • 3 step pulley for motor.
    • 3 step pulley for grinder.
    • Drive belt.
    • Base plate.
    • Uses 2 X 72" belts.
    • 3 ideal belt speeds of approx: 900, 1800, and 3600 ft/min. 

    The 1.5 hp motor can run on 110V or 220V AC.

     

    Requires switch, cord and plug appropriate to your setup choices.  (12V, 240V, plug or hardwire)

     

    • $2486.25
    • KMG with platen attachment.
    • 1.5 hp motor
    • 3 step pulley for motor.
    • 3 step pulley for grinder.
    • Work rest.
    • Drive belt.
    • Base plate.
    • Uses 2" X 72" belts.
    • 3 ideal belt speeds of approx: 900, 1800, and 3600 ft/min. 

    The 1.5 hp motor can run on 110V or 220V AC. 

    Requires switch, cord and plug appropriate to your setup choices.  (12V, 240V, plug or hardwire)

     

    • $2149.88
  • Package includes:

    • KMG-10 Grinder with  10" contact wheel.
    • Platen attachment.
    • Work rest.
    • 1.5/2 hp variable speed motor and VFD
    • Pulley for motor.
    • Pulley for grinder.
    • Drive belt.
    • Base plate.
    • Mounting bracket for VFD and electrical hardware.
    • Uses 2" X 72" belts.

     

    *The 2 hp motor and VFD will run on standard 110 or 220VAC.  A 2 hp motor is supplied, but when the VFD runs on a 110VAC,  the max power output is 1.5hp.  When the VFD runs on 220VAC it will produce a full 2hp. This extra value allows you to choose between using a 110V or a 220V power supply.

     

    You will need a cord and plug appropriate to your setup choices (120V, 240V, plug or hardwired

    • $3467.36