GRINDERS - BEE Grinders

It's difficult to find a well designed and reliable knife making grinder and it's even harder to find that grinder supported by a company with a long term reputation for outstanding customer support and service. We believe we have found that combination with the Bee grinders we offer here. These are industrial quality grinders. Please do not compare them to the home made or economy grinders found elsewhere. Please call to order grinders and their accessories as they are shipped direct from the manufacturer. The website is not able to accurately calculate shipping on these items.

Items: 19 of 13, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Single Speed 8" contact wheel. Comes complete with 1 hp motor, dust housing and square wheel type platen assembly. These are simply the Best Knife Making Grinders anywhere - at any price. Bee has been making Industrial Grinders for over 35 years - some of them monsters! This grinder was not "adapted" for the custom knifemaker. It was specifically designed from scratch for the custom knife maker. Bearings are permanently lubed and sealed. The dust housing is heavy guage sheet metal, and it spits dust out the rear 2 1/2" port even without a vacuum attached. Every machine comes equipped to flat grind, slack grind, hollow grind on the contact wheel and has two smaller, full rubber contact wheels located top and bottom of the flat platen. The tool rest is adjust able - a critical safety factor so you don't get blades (or your body parts) wedged between the rest and belt. The three wheel design means you are doing all your grinding at the same height. Compare this to two wheel grinders where you may be doing hollow grinding at belly button height and flat grinding at chest height. All changes and adjustments are done by hand wheels or levers. The only tool I've ever used on one of these machines was an Allen key when replacing a worn flat platen. It's available in 1 hp or 2 hp - single speed or variable speed - 8" contact wheel or 10" contact wheel - smooth or serrated. Whichever configuration you choose, you will never be sorry you bought the Bee. These are built at the factory to your order - usually a week to build and about the same for shipping most places. You are welcome to place your order through the store if you like, but shipping will have to be adjusted - or you could just phone or email your order in.

    • $2175.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Single Speed 10" contact wheel. Comes complete with 1HP motor, dust housing and square wheel type platen assembly. These are simply the Best Knife Making Grinders anywhere - at any price. Bee has been making Industrial Grinders for over 35 years - some of them monsters! This grinder was not "adapted" for the custom knifemaker. It was specifically designed from scratch for the custom knife maker. Bearings are permanently lubed and sealed. The dust housing is heavy guage sheet metal, and it spits dust out the rear 2 1/2" port even without a vacuum attached. Every machine comes equipped to flat grind, slack grind, hollow grind on the contact wheel and has two smaller, full rubber contact wheels located top and bottom of the flat platen. The tool rest is adjust able - a critical safety factor so you don't get blades (or your body parts) wedged between the rest and belt. The three wheel design means you are doing all your grinding at the same height. Compare this to two wheel grinders where you may be doing hollow grinding at belly button height and flat grinding at chest height. All changes and adjustments are done by hand wheels or levers. The only tool I've ever used on one of these machines was an Allen key when replacing a worn flat platen. It's available in 1 hp or 2 hp - single speed or variable speed - 8" contact wheel or 10" contact wheel - smooth or serrated. Whichever configuration you choose, you will never be sorry you bought the Bee. These are built at the factory to your order - usually a week to build and about the same for shipping most places. You are welcome to place your order through the store if you like, but shipping will have to be adjusted - or you could just phone or email your order in.

    • $2250.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Single Speed 8" contact wheel. Comes complete with 2HP motor, dust housing and square wheel type platen assembly. Requires 220V.

    • $2220.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Single Speed 10" contact wheel. Comes complete with 2HP motor, dust housing and square wheel type platen assembly. Requires 220V

    • $2285.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Variable Speed 10" contact wheel. Comes complete with 1 hp motor, dust housing and square wheel type platen assembly. These are simply the Best Knife Making Grinders anywhere - at any price. Bee has been making Industrial Grinders for over 35 years - some of them monsters! This grinder was not "adapted" for the custom knifemaker. It was specifically designed from scratch for the custom knife maker. Bearings are permanently lubed and sealed. The dust housing is heavy guage sheet metal, and it spits dust out the rear 2 1/2" port even without a vacuum attached. Every machine comes equipped to flat grind, slack grind, hollow grind on the contact wheel and has two smaller, full rubber contact wheels located top and bottom of the flat platen. The tool rest is adjust able - a critical safety factor so you don't get blades (or your body parts) wedged between the rest and belt. The three wheel design means you are doing all your grinding at the same height. Compare this to two wheel grinders where you may be doing hollow grinding at belly button height and flat grinding at chest height. All changes and adjustments are done by hand wheels or levers. The only tool I've ever used on one of these machines was an Allen key when replacing a worn flat platen. It's available in 1 hp or 2 hp - single speed or variable speed - 8" contact wheel or 10" contact wheel - smooth or serrated. Whichever configuration you choose, you will never be sorry you bought the Bee. These are built at the factory to your order - usually a week to build and about the same for shipping most places.

    Please call if wanting to order this item as an order for it will not be completed thru the store. 403 556-1113 

     

    This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.

    • $2880.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Variable Speed 8" contact wheel. Comes complete with 1 hp motor, dust housing and square wheel type platen assembly. These are simply the Best Knife Making Grinders anywhere - at any price. Bee has been making Industrial Grinders for over 35 years - some of them monsters! This grinder was not "adapted" for the custom knifemaker. It was specifically designed from scratch for the custom knife maker. Bearings are permanently lubed and sealed. The dust housing is heavy guage sheet metal, and it spits dust out the rear 2 1/2" port even without a vacuum attached. Every machine comes equipped to flat grind, slack grind, hollow grind on the contact wheel and has two smaller, full rubber contact wheels located top and bottom of the flat platen. The tool rest is adjust able - a critical safety factor so you don't get blades (or your body parts) wedged between the rest and belt. The three wheel design means you are doing all your grinding at the same height. Compare this to two wheel grinders where you may be doing hollow grinding at belly button height and flat grinding at chest height. All changes and adjustments are done by hand wheels or levers. The only tool I've ever used on one of these machines was an Allen key when replacing a worn flat platen. It's available in 1 hp or 2 hp - single speed or variable speed - 8" contact wheel or 10" contact wheel - smooth or serrated. Whichever configuration you choose, you will never be sorry you bought the Bee. These are built at the factory to your order - usually a week to build and about the same for shipping most places.

    Please call if wanting to order this item as an order for it will not be completed thru the store. 403 556-1113 

    This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.

     

    This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.

    • $2818.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Variable Speed 10" contact wheel. Comes complete with 2HP motor, dust housing and square wheel type platen assembly.

    Please call if wanting to order this item as an order for it will not be completed thru the store 403 556-1113 

     

    This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.

    • $3213.00
  • Drag and drop me to the cart

    Bee Metal 2 x 72 Knife Maker's Grinder Variable Speed 8" contact wheel. Comes complete with 2HP motor, dust housing and square wheel type platen assembly.

    Please call if wanting to order this item as an order for it will not be completed thru the store. 403 556-1113 

     

    This item is too heavy for Canada Post and will incurr freight shipping charges that have to be added manually.

    • $3113.00
  • Drag and drop me to the cart

    This bracket holds 2 small wheels (wheels not included) Please call if wanting to order this item as an order for it will not be completed thru the store 403 556-1113

    • $75.00
Items: 19 of 13, per page